Nikkormat Ft Serial Numbers

1. Nikkormat Serial Numbers
2. Nikkormat Ft Battery
3. Nikkormat Ft Serial Numbers
4. Nikon Nikkormat Ft
5. Nikkormat Ft Serial Numbers Chart

Jul 17, 2014. In front of the serial numbers on the top plate of all models the model name is engraved. To mount a lens the aperture should be set at f/5.6 as the prong of the lens will fit into exposure meter coupler of the camera. Very early models of the Nikomat/Nikkormat FT and FS have a flat exposure counter window, later models have a chrome ring. For identification among the rest of Nikkormats is quite easy, a 'FT' precedes the serial number on the camera body' and the letter 'N' is inscribed next to the film rewind knob and above the light meter window on the top of the camera. Nikkormat FTn was available in satin chrome or black finish. Jun 30, 2006. Scr - Number of screws in the lens mount, useful for identifying pre-AI and AI versions 5- = 5 slot screws 3+ = 3 cross-head screws etc Notes - Identifying features of the lens and points of interest Start No - Serial number of first lens made Confirmed - Earliest and latest serial numbers seen ^ lens added to list in last 6 months.

Introduction

The Nikomat/Nikkormat FTN Nippon Kōgaku was a successful and lauded iteration of the Nikomat/Nikkormat FT series. Introduced in 1967, the FTN is built on substantially the same chassis as the FT, but had center-weighted metering instead of whole-frame average metering, a shutter-speed display in the viewfinder, a few other minor changes, and, critically, a simplified process for mounting the lens. Nowhere on the body does the camera directly identify itself as an 'FTN.' The serial number begins with an 'FT,' probably continuous with the serial numbers of the FT, and there is a larger capital 'N' nearby, adjacent to the external meter indicator. The 'N' may stand for 'new.' At any rate, it seems the manufacturers viewed this camera as not a new model but an update.

Descargar adobe reader dc full. The Nikkormat series was the budget range of Nikon SLR's, aimed at those who could not afford the professional range (including the Nikon F). However, for several reasons, the Nikkormat achieved a significant following. For one thing, some professionals preferred the smaller, cheaper and simpler Nikkormats. For another, the camera has an extremely reliable metal-blade focal-plane shutter, based on the Copal Square, known for its high X-speed, durability and accuracy. In the eyes of some, this puts it ahead of the Nikon F technically, though this feature would be picked up in the professional range at a later date, and in fact the two lines would be folded together in the Nikon FE.

In a way, the early Nikkormats can be seen as the successors of the Nikkorex F, a Mamiya-made, Nikon-branded body with the original Copal Square (it was the first SLR to have it). This Nikkorex was a step up from the other Nikkorexes, taking F-mount lenses and a clip-on meter, and in fact filled a new niche for Nippon Kougaku, what we might now call the 'prosumer' niche, between amateur and professional-grade equipment. By introducing the metal-blade shutter type and pioneering the marketing strategy, the Nikkorex F paved the way for the Nikkormats.

The Nikkormat FTN represents the most common of the FT series Nikkormats, having been made for almost ten years. Its predecessor introduced the body type and most of the basic features, while the FTN added some much-needed fit-and-finish, and the FT2 and FT3 continued to refine the same body style.

The FTN was produced until 1976, with minor modifications.

Physical description

The camera is a fairly conventional SLR in the layout of the chassis. However, there are some unusual features that give the camera an unusual look: the shutter speed selector is, as on many fixed-lens cameras, but few SLR's, a ring around the lens mount. This may at first seem like an inconvenience, but it puts both the exposure controls in the same place, and frees up the top of the camera for other things. To wit, the camera features a very large magnified frame counter where many cameras would have the shutter-speed dial, as well as a depth of field preview button that can be mistaken for a second shutter release, closer to the pentaprism. The apparent inconvenience of the shutter-speed ring is also lessened by the fact that the shutter speed is always visible inside the viewfinder, a new feature of the FTN model. The shutter speed is also visible on the opposite side of the ring from the setting lever, with speeds higher than 1/125 (X-speed) in red (indicating that flash sync is usable.)

Another reason for the camera's unusual appearance is the aperture coupling. This assembly is a ring that surrounds the lens mount, with a projecting prong. This device is a necessity of the Nikon F lens system, which reads the aperture via a slotted shoe on the lens's aperture ring. To mount a lens and meter it properly, the aperture must be set to 5.6, the prong must be moved to the far right (facing the camera), the lens must be attached to the camera and finally, the aperture ring must be turned all the way to the smallest aperture and then all the way to the largest aperture, in order to mechanically set the aperture range in the camera. A small scale on the aperture-sensing ring confirms the maximum aperture. This may seem complicated to photographers who are more used to later SLR's, but it is in fact a simplification from the Nikkormat FT.

Another unusual feature is an external meter needle in addition to the one in the viewfinder. The manual describes this as being a convenience for use at waist-level or when mounted on a tripod.

Unlike the FT, some FTN's, perhaps a majority, have a plastic grip on the advance lever, while earlier examples have the FT's lightly knurled all-metal lever. https://pihchingrelaw1984.mystrikingly.com/blog/can-i-use-office-365-on-mac-and-pc.

Shutter

Nikkormat Serial Numbers

The shutter is substantially the design which Mamiya, Yashica and Copal (among others) came together to design in the late 1960's, which was marketed by Copal as the Copal Square and first mounted by Mamiya in the Nikkorex F (and store-brand derivatives). Red giant universe 2 crack mac. It is a fully-mechanical focal-plane shutter, with the moving elements being six metal blinds being propelled by levers, instead of continuous cloth curtains propelled by rollers. Unlike the Nikkorex Copal Square shutter, the Nikkormat shutter seems to be made in-house, rather than by Copal, and has the levers on the mirror-box side, rather than the film side. Shutter speeds run from 1/1000s to 1s and B, with intermediate speeds available between each shutter speed from 1/1000s to 1/250s. Using the shutter with the selector between other speeds is not recommended by the manual.

Nikkormat Ft Battery

The shutter speeds are shown by transparent numbers in a slider moving inside the pentaprism enclosure adjacent to the focusing screen. The current speed is lit by light coming through the lens, as well as the adjacent shutter speeds (or a diamond at each end of the speed range), which are tinted yellow.

Metering

When the maximum aperture and the film speed have finally been properly set, the camera acts as a fairly conventional center-the-needle metered-manual camera, metering with the aperture wide open. The meter is activated by pulling out the film-advance lever slightly, revealing a red dot. There is a needle at the right-hand side of the viewfinder, between a bracket marked with a '-' and one marked with a '+,' which were not present on the FT. Confusingly, the plus and minus marks indicates over- and underexposure, respectively; the plus sign, for instance, does not indicate that the exposure should be increased, as some photographers would naturally intuit. If the needle centers with the shutter at 'B,' the photographer should use a tripod and hold the shutter for two seconds.

Introduction

The Nikomat/Nikkormat FTN Nippon Kōgaku was a successful and lauded iteration of the Nikomat/Nikkormat FT series. Introduced in 1967, the FTN is built on substantially the same chassis as the FT, but had center-weighted metering instead of whole-frame average metering, a shutter-speed display in the viewfinder, a few other minor changes, and, critically, a simplified process for mounting the lens. Nowhere on the body does the camera directly identify itself as an 'FTN.' The serial number begins with an 'FT,' probably continuous with the serial numbers of the FT, and there is a larger capital 'N' nearby, adjacent to the external meter indicator. The 'N' may stand for 'new.' At any rate, it seems the manufacturers viewed this camera as not a new model but an update.

Descargar adobe reader dc full. The Nikkormat series was the budget range of Nikon SLR's, aimed at those who could not afford the professional range (including the Nikon F). However, for several reasons, the Nikkormat achieved a significant following. For one thing, some professionals preferred the smaller, cheaper and simpler Nikkormats. For another, the camera has an extremely reliable metal-blade focal-plane shutter, based on the Copal Square, known for its high X-speed, durability and accuracy. In the eyes of some, this puts it ahead of the Nikon F technically, though this feature would be picked up in the professional range at a later date, and in fact the two lines would be folded together in the Nikon FE.

In a way, the early Nikkormats can be seen as the successors of the Nikkorex F, a Mamiya-made, Nikon-branded body with the original Copal Square (it was the first SLR to have it). This Nikkorex was a step up from the other Nikkorexes, taking F-mount lenses and a clip-on meter, and in fact filled a new niche for Nippon Kougaku, what we might now call the 'prosumer' niche, between amateur and professional-grade equipment. By introducing the metal-blade shutter type and pioneering the marketing strategy, the Nikkorex F paved the way for the Nikkormats.

The Nikkormat FTN represents the most common of the FT series Nikkormats, having been made for almost ten years. Its predecessor introduced the body type and most of the basic features, while the FTN added some much-needed fit-and-finish, and the FT2 and FT3 continued to refine the same body style.

The FTN was produced until 1976, with minor modifications.

Physical description

The camera is a fairly conventional SLR in the layout of the chassis. However, there are some unusual features that give the camera an unusual look: the shutter speed selector is, as on many fixed-lens cameras, but few SLR's, a ring around the lens mount. This may at first seem like an inconvenience, but it puts both the exposure controls in the same place, and frees up the top of the camera for other things. To wit, the camera features a very large magnified frame counter where many cameras would have the shutter-speed dial, as well as a depth of field preview button that can be mistaken for a second shutter release, closer to the pentaprism. The apparent inconvenience of the shutter-speed ring is also lessened by the fact that the shutter speed is always visible inside the viewfinder, a new feature of the FTN model. The shutter speed is also visible on the opposite side of the ring from the setting lever, with speeds higher than 1/125 (X-speed) in red (indicating that flash sync is usable.)

Another reason for the camera's unusual appearance is the aperture coupling. This assembly is a ring that surrounds the lens mount, with a projecting prong. This device is a necessity of the Nikon F lens system, which reads the aperture via a slotted shoe on the lens's aperture ring. To mount a lens and meter it properly, the aperture must be set to 5.6, the prong must be moved to the far right (facing the camera), the lens must be attached to the camera and finally, the aperture ring must be turned all the way to the smallest aperture and then all the way to the largest aperture, in order to mechanically set the aperture range in the camera. A small scale on the aperture-sensing ring confirms the maximum aperture. This may seem complicated to photographers who are more used to later SLR's, but it is in fact a simplification from the Nikkormat FT.

Another unusual feature is an external meter needle in addition to the one in the viewfinder. The manual describes this as being a convenience for use at waist-level or when mounted on a tripod.

Unlike the FT, some FTN's, perhaps a majority, have a plastic grip on the advance lever, while earlier examples have the FT's lightly knurled all-metal lever. https://pihchingrelaw1984.mystrikingly.com/blog/can-i-use-office-365-on-mac-and-pc.

Shutter

Nikkormat Serial Numbers

The shutter is substantially the design which Mamiya, Yashica and Copal (among others) came together to design in the late 1960's, which was marketed by Copal as the Copal Square and first mounted by Mamiya in the Nikkorex F (and store-brand derivatives). Red giant universe 2 crack mac. It is a fully-mechanical focal-plane shutter, with the moving elements being six metal blinds being propelled by levers, instead of continuous cloth curtains propelled by rollers. Unlike the Nikkorex Copal Square shutter, the Nikkormat shutter seems to be made in-house, rather than by Copal, and has the levers on the mirror-box side, rather than the film side. Shutter speeds run from 1/1000s to 1s and B, with intermediate speeds available between each shutter speed from 1/1000s to 1/250s. Using the shutter with the selector between other speeds is not recommended by the manual.

Nikkormat Ft Battery

The shutter speeds are shown by transparent numbers in a slider moving inside the pentaprism enclosure adjacent to the focusing screen. The current speed is lit by light coming through the lens, as well as the adjacent shutter speeds (or a diamond at each end of the speed range), which are tinted yellow.

Metering

When the maximum aperture and the film speed have finally been properly set, the camera acts as a fairly conventional center-the-needle metered-manual camera, metering with the aperture wide open. The meter is activated by pulling out the film-advance lever slightly, revealing a red dot. There is a needle at the right-hand side of the viewfinder, between a bracket marked with a '-' and one marked with a '+,' which were not present on the FT. Confusingly, the plus and minus marks indicates over- and underexposure, respectively; the plus sign, for instance, does not indicate that the exposure should be increased, as some photographers would naturally intuit. If the needle centers with the shutter at 'B,' the photographer should use a tripod and hold the shutter for two seconds.

The second meter needle merely has a circle to indicate the proper exposure, though '+' and '-' signs were added to the next model.

Nikkormat Ft Serial Numbers

Links

• Nikkormat FTN at Nikon's History & Technology site
• Nikomat & Nikkormat FTN Camera Bodies' in Richard de Stoutz' 'Nikon F Collection & Typology'
• Nikkormat FT noir on www.collection-appareils.fr by Sylvain Halgand (in French)
• Nikkormat at Classic Cameras by RaúlM.
• Instruction Manual - English at at M.Butkus' www.orphancameras.com
• Nikkormat FTN page at Camera Portraits

Nikon Nikkormat Ft

Nikkormat Ft Serial Numbers Chart